Description
The laboratory three-reactor catalytic unit is designed for testing heterogeneous catalysts, studying the kinetics of chemical reactions, evaluating the scalability and effectiveness of proposed technical solutions, analyzing and controlling the quality of catalysts in production.
The installation allows for simultaneous testing in three independent reactors. It is possible to complete installations with both parallel and sequentially installed reactors.
Contents (the final delivery package depends on the terms of reference):
- Gas preparation and supply unit (6 channels as standard);
- Liquid feed unit (1-3 channels);
- Raw material heating and evaporation unit;
- Reactor unit;
- Cooling, separation and drying unit;
- Gas circulation unit;
- Sampling unit;
- The unit for measuring the volume of the outgoing gas;
- The control unit.
Specifications
General installation information
|
Installation weight, no more than kg |
150 |
|
Overall dimensions of the installation, no more than mm |
1000×600×1750 |
|
Installed power supply capacity, kW |
4,0 |
|
Volume of a tubular reactor with a fixed catalyst bed, cm3 |
100 |
|
Maximum working pressure, MPa |
10,0 |
|
Maximum operating temperature, °С |
700 |
|
The volume of the loaded catalyst, cm3 |
5-50 |
|
Circulation ratio, range |
1-100 |
|
Fluid flow, ml/min |
0,005-4,995 |
|
Maximum pressure at which liquid is supplied to the installation, MPa |
10,0 |
|
Communication with a computer via Ethernet interfaces |
USB, RS232 |
Control block
|
Monitoring and control of process parameters |
Software, SCADA scheme |
|
Displaying parameters online |
SCADA diagram |
|
Recording Process Parameters |
Data archiving |